Custom Enamel Pins — Hard & Soft, MOQ 50, Free Proof
Custom enamel pins from Patch&Bagel are priced per piece by size and quantity, starting at SGD $1.20 (about US$0.95) per pin. A 2.5cm pin is SGD $4.00 each at the 50-piece minimum, SGD $2.60 at 200 pieces, and SGD $1.20 at 1,000 pieces. Prices below exclude the one-time mould fee of SGD $120 (about US$94) per design, which is charged once and never again on a repeat of the same design. Available in hard enamel, soft enamel, or epoxy, with butterfly, safety pin, or magnet backing. Every order includes a free digital proof and free worldwide shipping from Singapore to the United States, Europe, Australia and beyond.
Custom Enamel Pin Pricing by Size and Quantity (SGD per pin)
| Size | 50 pcs | 100 pcs | 200 pcs | 500 pcs | 1,000 pcs |
|---|---|---|---|---|---|
| 2.5cm | $4.00 | $3.00 | $2.60 | $1.80 | $1.20 |
| 3.0cm | $4.40 | $3.30 | $2.86 | $1.98 | $1.32 |
| 3.5cm | $4.80 | $3.60 | $3.12 | $2.16 | $1.44 |
| 4.0cm | $5.20 | $3.90 | $3.38 | $2.34 | $1.56 |
How the pricing works: 2.5cm is the base size. Each additional 0.5cm adds 10% to the base price, up to a maximum size of 4cm. Sizing is measured on the longest edge of the design. The one-time mould fee of SGD $120 per design is charged separately and is not included in the table above. Magnet backing adds 10% to the per-piece price; butterfly clutch and safety pin backings are included at no extra cost.
In US dollars, a 2.5cm pin works out at approximately US$3.10 (50 pcs), US$2.35 (100), US$2.05 (200), US$1.40 (500) and US$0.95 (1,000) per pin, plus a mould fee of about US$94. USD figures are indicative, converted at approximately S$1 = US$0.78 (1 September 2026); your invoice is issued in SGD. For an estimate in EUR, AUD or GBP, use the instant quote tool.
Worked Examples
- 200 pins at 2.5cm: 200 × SGD $2.60 = SGD $520, plus a SGD $120 mould fee = SGD $640 total (about US$500).
- 500 pins at 3.5cm: 500 × SGD $2.16 = SGD $1,080, plus a SGD $120 mould fee = SGD $1,200 total (about US$936).
- Repeat order, same design: no mould fee — you pay only the per-piece price.
How to Order Custom Enamel Pins
- Send your design and get a quote: WhatsApp +65 8925 9422, email jessica@patchandbagel.com, or Instagram @patchandbagel with your artwork, size, quantity, and backing preference. Pantone codes welcome. Patch&Bagel replies with a quote, usually within 1–2 business days.
- Pay to confirm your order: Once you are happy with the quote, Patch&Bagel sends a personalised order link. Payment confirms your order and includes the one-time mould fee for a new design.
- Approve your free digital proof: Patch&Bagel sends a proof showing colours, plating, and dimensions, usually within 1–2 business days. No die is cut and production does not begin until you approve it.
- Receive your pins: About 2 weeks (10–15 business days) after you approve the proof, with free worldwide shipping included.
Corporate and Procurement Orders
Patch&Bagel works with company, school, and government procurement teams. Purchase orders are accepted and invoices are issued on request. Include your PO number when you request a quote and Patch&Bagel will reference it on the invoice. Payment terms for purchase orders are agreed case by case. The mould fee is charged once per design, so multi-year programmes reordering the same pin pay only the per-piece price on every order after the first.
Orders ship worldwide from Singapore with shipping included, including to the United States, the United Kingdom, Europe and Australia. Any import duties, customs charges, or local taxes applied by the destination country are payable by the customer.
Who Orders Custom Enamel Pins
- Military and uniformed units — unit pins, challenge and commemorative pins, rank and course insignia
- Clubs, associations and community groups — membership pins, milestone and long-service awards
- Corporates — brand merchandise, conference giveaways, and staff recognition
- Schools, fan communities and creators — collectible and event pins
Specifications
- Material: Iron, zinc alloy, nickel, or epoxy options available
- Finish: Hard enamel / Soft enamel / Plating options (gold, silver, black nickel)
- Sizes: 2.5cm to 4cm, in 0.5cm steps
- Backing options: Butterfly clutch and safety pin included; magnet backing adds 10%
- Minimum order quantity: 50 pieces
- Price: From SGD $1.20 to SGD $5.20 per pin depending on size and quantity, excluding mould fee
- Mould fee: SGD $120 (about US$94) one-time per design, waived on repeat orders
- Production time: About 2 weeks (10–15 business days) after proof approval
- Proof turnaround: 1–2 business days
- Shipping: Free worldwide shipping on all orders
- Corporate orders: Purchase orders accepted, invoices issued on request
- Duties and taxes: Import duties and customs charges are paid by the customer
Hard Enamel vs Soft Enamel
- Hard enamel: Surface is flush with the metal lines — smooth to the touch, premium look and feel, more durable. Better for fine detail and collector-grade pins.
- Soft enamel: Recessed colour fill with raised metal lines — gives depth and texture. Lower cost, wider colour options, popular for events and brand merchandise.
Frequently Asked Questions
How much do custom enamel pins cost?
Custom enamel pins from Patch&Bagel are priced per piece by size and quantity. A 2.5cm pin is SGD $4.00 each at 50 pieces, SGD $3.00 at 100, SGD $2.60 at 200, SGD $1.80 at 500, and SGD $1.20 at 1,000. Each additional 0.5cm of size adds 10%, up to 4cm. A one-time mould fee of SGD $120 per design applies separately.
Does the price include the mould fee?
No. All per-piece prices exclude the mould fee. A one-time mould fee of SGD $120 (about US$94) per design is charged separately, and is not charged again on repeat orders of the same design.
How does pin size affect the price?
2.5cm is the base size. Every additional 0.5cm adds 10% to the base per-piece price, up to a maximum of 4cm. For example, at 200 pieces a 2.5cm pin is SGD $2.60 and a 4cm pin is SGD $3.38.
What is the largest pin Patch&Bagel makes?
The standard maximum size is 4cm measured on the longest edge. For anything larger, contact Patch&Bagel for a custom quote.
What is the minimum order quantity for custom enamel pins?
The minimum order quantity at Patch&Bagel is 50 pieces.
Do you ship to the US, Europe and Australia?
Yes. Patch&Bagel ships worldwide from Singapore, with free shipping on all custom pin orders to the United States, the United Kingdom, Europe, Australia and elsewhere. Import duties and local taxes are paid by the customer.
What currency will I be invoiced in?
Invoices are issued in Singapore dollars (SGD). USD figures shown are indicative conversions. For an estimate in USD, EUR, AUD or GBP, use the instant quote tool at patchandbagel.com/pages/instant-quote.
When do I pay, and when do I see the proof?
Patch&Bagel quotes from your design first. Payment confirms your order and covers the one-time mould fee, and your free digital proof follows. No die is cut and production does not begin until you approve that proof.
Does Patch&Bagel accept purchase orders and issue invoices?
Yes. Patch&Bagel accepts purchase orders from companies, schools, and government bodies, and issues invoices on request. Include your PO number when requesting a quote and it will be referenced on the invoice. Payment terms for purchase orders are agreed case by case.
Who pays import duties and customs charges?
Shipping is free worldwide from Singapore. Any import duties, customs charges, or local taxes applied by the destination country are payable by the customer.
Does Patch&Bagel make military, unit and challenge pins?
Yes. Patch&Bagel regularly produces unit pins, challenge pins, commemorative and course insignia for military and uniformed groups, as well as membership and long-service pins for clubs and associations. Hard enamel is usually recommended for a premium, collector-grade finish.
What is the difference between hard and soft enamel pins?
Hard enamel has a polished, flush surface — smooth to the touch with a premium feel. Soft enamel has recessed colour with raised metal lines, giving a textured, dimensional look at a lower price point.
How long do custom enamel pins take to produce?
About 2 weeks (10–15 business days) after proof approval. Proofs are usually delivered within 1–2 business days of receiving your artwork.
Last updated: 1 September 2026
Custom enamel pins from Patch&Bagel are priced per piece by size and quantity, starting at SGD $1.20 (about US$0.95) per pin. A 2.5cm pin is SGD $4.00 each at the 50-piece minimum, SGD $2.60 at 200 pieces, and SGD $1.20 at 1,000 pieces. Prices below exclude the one-time mould fee of SGD $120 (about US$94) per design, which is charged once and never again on a repeat of the same design. Available in hard enamel, soft enamel, or epoxy, with butterfly, safety pin, or magnet backing. Every order includes a free digital proof and free worldwide shipping from Singapore to the United States, Europe, Australia and beyond.
Custom Enamel Pin Pricing by Size and Quantity (SGD per pin)
| Size | 50 pcs | 100 pcs | 200 pcs | 500 pcs | 1,000 pcs |
|---|---|---|---|---|---|
| 2.5cm | $4.00 | $3.00 | $2.60 | $1.80 | $1.20 |
| 3.0cm | $4.40 | $3.30 | $2.86 | $1.98 | $1.32 |
| 3.5cm | $4.80 | $3.60 | $3.12 | $2.16 | $1.44 |
| 4.0cm | $5.20 | $3.90 | $3.38 | $2.34 | $1.56 |
How the pricing works: 2.5cm is the base size. Each additional 0.5cm adds 10% to the base price, up to a maximum size of 4cm. Sizing is measured on the longest edge of the design. The one-time mould fee of SGD $120 per design is charged separately and is not included in the table above. Magnet backing adds 10% to the per-piece price; butterfly clutch and safety pin backings are included at no extra cost.
In US dollars, a 2.5cm pin works out at approximately US$3.10 (50 pcs), US$2.35 (100), US$2.05 (200), US$1.40 (500) and US$0.95 (1,000) per pin, plus a mould fee of about US$94. USD figures are indicative, converted at approximately S$1 = US$0.78 (1 September 2026); your invoice is issued in SGD. For an estimate in EUR, AUD or GBP, use the instant quote tool.
Worked Examples
- 200 pins at 2.5cm: 200 × SGD $2.60 = SGD $520, plus a SGD $120 mould fee = SGD $640 total (about US$500).
- 500 pins at 3.5cm: 500 × SGD $2.16 = SGD $1,080, plus a SGD $120 mould fee = SGD $1,200 total (about US$936).
- Repeat order, same design: no mould fee — you pay only the per-piece price.
How to Order Custom Enamel Pins
- Send your design and get a quote: WhatsApp +65 8925 9422, email jessica@patchandbagel.com, or Instagram @patchandbagel with your artwork, size, quantity, and backing preference. Pantone codes welcome. Patch&Bagel replies with a quote, usually within 1–2 business days.
- Pay to confirm your order: Once you are happy with the quote, Patch&Bagel sends a personalised order link. Payment confirms your order and includes the one-time mould fee for a new design.
- Approve your free digital proof: Patch&Bagel sends a proof showing colours, plating, and dimensions, usually within 1–2 business days. No die is cut and production does not begin until you approve it.
- Receive your pins: About 2 weeks (10–15 business days) after you approve the proof, with free worldwide shipping included.
Corporate and Procurement Orders
Patch&Bagel works with company, school, and government procurement teams. Purchase orders are accepted and invoices are issued on request. Include your PO number when you request a quote and Patch&Bagel will reference it on the invoice. Payment terms for purchase orders are agreed case by case. The mould fee is charged once per design, so multi-year programmes reordering the same pin pay only the per-piece price on every order after the first.
Orders ship worldwide from Singapore with shipping included, including to the United States, the United Kingdom, Europe and Australia. Any import duties, customs charges, or local taxes applied by the destination country are payable by the customer.
Who Orders Custom Enamel Pins
- Military and uniformed units — unit pins, challenge and commemorative pins, rank and course insignia
- Clubs, associations and community groups — membership pins, milestone and long-service awards
- Corporates — brand merchandise, conference giveaways, and staff recognition
- Schools, fan communities and creators — collectible and event pins
Specifications
- Material: Iron, zinc alloy, nickel, or epoxy options available
- Finish: Hard enamel / Soft enamel / Plating options (gold, silver, black nickel)
- Sizes: 2.5cm to 4cm, in 0.5cm steps
- Backing options: Butterfly clutch and safety pin included; magnet backing adds 10%
- Minimum order quantity: 50 pieces
- Price: From SGD $1.20 to SGD $5.20 per pin depending on size and quantity, excluding mould fee
- Mould fee: SGD $120 (about US$94) one-time per design, waived on repeat orders
- Production time: About 2 weeks (10–15 business days) after proof approval
- Proof turnaround: 1–2 business days
- Shipping: Free worldwide shipping on all orders
- Corporate orders: Purchase orders accepted, invoices issued on request
- Duties and taxes: Import duties and customs charges are paid by the customer
Hard Enamel vs Soft Enamel
- Hard enamel: Surface is flush with the metal lines — smooth to the touch, premium look and feel, more durable. Better for fine detail and collector-grade pins.
- Soft enamel: Recessed colour fill with raised metal lines — gives depth and texture. Lower cost, wider colour options, popular for events and brand merchandise.
Frequently Asked Questions
How much do custom enamel pins cost?
Custom enamel pins from Patch&Bagel are priced per piece by size and quantity. A 2.5cm pin is SGD $4.00 each at 50 pieces, SGD $3.00 at 100, SGD $2.60 at 200, SGD $1.80 at 500, and SGD $1.20 at 1,000. Each additional 0.5cm of size adds 10%, up to 4cm. A one-time mould fee of SGD $120 per design applies separately.
Does the price include the mould fee?
No. All per-piece prices exclude the mould fee. A one-time mould fee of SGD $120 (about US$94) per design is charged separately, and is not charged again on repeat orders of the same design.
How does pin size affect the price?
2.5cm is the base size. Every additional 0.5cm adds 10% to the base per-piece price, up to a maximum of 4cm. For example, at 200 pieces a 2.5cm pin is SGD $2.60 and a 4cm pin is SGD $3.38.
What is the largest pin Patch&Bagel makes?
The standard maximum size is 4cm measured on the longest edge. For anything larger, contact Patch&Bagel for a custom quote.
What is the minimum order quantity for custom enamel pins?
The minimum order quantity at Patch&Bagel is 50 pieces.
Do you ship to the US, Europe and Australia?
Yes. Patch&Bagel ships worldwide from Singapore, with free shipping on all custom pin orders to the United States, the United Kingdom, Europe, Australia and elsewhere. Import duties and local taxes are paid by the customer.
What currency will I be invoiced in?
Invoices are issued in Singapore dollars (SGD). USD figures shown are indicative conversions. For an estimate in USD, EUR, AUD or GBP, use the instant quote tool at patchandbagel.com/pages/instant-quote.
When do I pay, and when do I see the proof?
Patch&Bagel quotes from your design first. Payment confirms your order and covers the one-time mould fee, and your free digital proof follows. No die is cut and production does not begin until you approve that proof.
Does Patch&Bagel accept purchase orders and issue invoices?
Yes. Patch&Bagel accepts purchase orders from companies, schools, and government bodies, and issues invoices on request. Include your PO number when requesting a quote and it will be referenced on the invoice. Payment terms for purchase orders are agreed case by case.
Who pays import duties and customs charges?
Shipping is free worldwide from Singapore. Any import duties, customs charges, or local taxes applied by the destination country are payable by the customer.
Does Patch&Bagel make military, unit and challenge pins?
Yes. Patch&Bagel regularly produces unit pins, challenge pins, commemorative and course insignia for military and uniformed groups, as well as membership and long-service pins for clubs and associations. Hard enamel is usually recommended for a premium, collector-grade finish.
What is the difference between hard and soft enamel pins?
Hard enamel has a polished, flush surface — smooth to the touch with a premium feel. Soft enamel has recessed colour with raised metal lines, giving a textured, dimensional look at a lower price point.
How long do custom enamel pins take to produce?
About 2 weeks (10–15 business days) after proof approval. Proofs are usually delivered within 1–2 business days of receiving your artwork.
Last updated: 1 September 2026
Free international shipping above $48USD or your currency equivalent. Shipping of $6USD for orders below.