Custom back patches in Singapore start at a minimum of 20 pieces: Patch&Bagel produces large embroidered, woven and silk screen back patches from SGD $160 for 20 pieces (SGD $210 for 30), and PVC back patches from 30 pieces (SGD $300 for 30). A back patch is simply a large patch — typically 20–30 cm across — designed to sit on the back panel of a jacket, vest, or hoodie. Every order includes a free digital proof, and production runs roughly 2–3 weeks from proof approval, with free international shipping.
This guide explains how big a back patch should be, which patch type and backing to choose, how to prepare artwork, and how to order at the low quantities a club, team, or small brand actually needs.
What is a back patch?
A back patch is a large patch — usually 20–30 cm wide — made to be worn across the back of a jacket, denim vest, or hoodie, most commonly by riding groups, sports teams, bands, and clothing labels. Because of its size it acts as the centrepiece of an outfit or team kit, which is why detail, colour, and durable backing matter more than on a small chest patch. Patch&Bagel produces custom back patches in Singapore in embroidered, woven, silk screen, and PVC finishes.
How big should a custom back patch be?
A standard custom back patch measures roughly 25–30 cm at its widest point for adult jackets and vests, while a smaller "centre back" patch of 15–20 cm suits hoodies or lighter garments. The right size depends on the garment and how much of the back panel you want to fill. Larger patches carry more detail, so a design with fine text or gradients benefits from going bigger. Patch&Bagel confirms the exact finished size on the free digital proof before production.
Which patch type is best for a back patch?
For most back patches, embroidered gives the classic raised, textured look; silk screen reproduces photo-realistic detail and gradients embroidery cannot; woven captures fine lines and small text crisply; and PVC is fully waterproof and hard-wearing for outdoor use. The table below compares the four types as produced by Patch&Bagel in Singapore.
| Patch type | MOQ | From (SGD) | Best for a back patch when |
|---|---|---|---|
| Embroidered | 20 | $160 / 20 ($210 / 30) | You want the classic stitched, textured look |
| Silk screen | 20 | $160 / 20 ($210 / 30) | Design has photos, gradients, or fine shading |
| Woven | 20 | $160 / 20 ($210 / 30) | Design has small text or very fine detail |
| PVC (rubber) | 30 | $300 / 30 ($700 / 100) | The patch will face rain, sun, or heavy wear |
Which backing should a back patch have?
Sew-on backing is the most reliable choice for large back patches, because the size and weight of the patch make iron-on adhesive more likely to peel over time. Velcro (hook-and-loop) is a good alternative if you want to swap the patch between garments, and it is popular on riding and tactical vests. Iron-on works for smaller back patches on casual wear, but for a full-size jacket patch that gets worn hard, sew-on is what Patch&Bagel recommends.
How do you prepare artwork for a back patch?
Send the highest-resolution artwork you have — vector files (AI, EPS, PDF, SVG) reproduce best, but Patch&Bagel can redraw from a clear image. Keep critical text at a readable size, and remember that embroidery simplifies very fine detail, so a busy design may reproduce better as silk screen or woven. There are no design or setup fees, and the free digital proof shows exactly how the finished patch will look before anything goes into production.
How to order custom back patches in Singapore
Ordering from Patch&Bagel takes four steps: choose your patch type, size, and quantity (from 20 pieces for embroidered, woven or silk screen; 30 for PVC); send your artwork or brief; approve the free digital proof; and receive your order in roughly 2–3 weeks. Free international shipping is included.
Frequently asked questions
What is the minimum order for custom back patches in Singapore?
Custom embroidered, woven, and silk screen back patches from Patch&Bagel start at 20 pieces (from SGD $160 for 20, $210 for 30). Custom PVC back patches start at 30 pieces (from SGD $300 for 30).
How much does a large back patch cost?
Back patch pricing is based on the order quantity and patch type. Embroidered, woven and silk screen patches start at SGD $160 for 20 pieces; PVC starts at SGD $300 for 30. Larger sizes are quoted on the free digital proof.
Can I get a single back patch?
Patch&Bagel's minimum is 20 pieces for embroidered, woven or silk screen patches, so single one-off patches are not produced — but 20 pieces is low enough for a small club, band, or team.
What backing is best for a jacket back patch?
Sew-on is the most durable backing for a large jacket back patch. Velcro is best if you want to swap the patch between garments.
Explore more
- Ultimate Guide to Designing Your Custom Patches
- Patch Backing Types Explained: Iron-On vs Sew-On vs Velcro vs Sticker
- Embroidered vs Woven vs PVC vs Silk Screen Patches: How to Choose
Product pages: custom embroidered patches, silk screen patches, and PVC patches.
Last updated: 10 August 2026. Written by Jessica, Owner of Patch&Bagel. Pricing and MOQs verified against live Patch&Bagel Singapore product listings.